Say your porch is 12 by 16. That’s 192 square feet, and the first page you open says $5 to $20 a square foot, so you multiply and land somewhere between $960 and $3,840. The next page says $50 a foot and you get $9,600. Both are right, and that’s the trouble with almost every screened porch cost range: one national number, and no question about what’s already standing. The mesh, the part you picture when you say “screened porch,” is the cheapest thing on the bill. One roll big enough for the whole porch costs $74 to $133. The roof and the floor are where the money goes, and whether you already own them decides which price is yours. So here is one 12×16 porch priced three ways: screened by you, by a crew, and built from the ground up.

TL;DR
- Screening an existing roofed 12×16 porch yourself runs roughly $600 to $1,000 in materials, and a single $74 to $133 roll of fiberglass mesh covers all three open sides.
- Hiring out the same screen-in runs about $960 to $4,800 across the cost guides, with $2,000 to $4,000 the typical band and about $2,540 where 192 square feet falls on Angi’s size table.
- Building a new 12×16 screened porch runs about $9,600 to $33,600, because now you’re paying for a roof, a floor, posts and a permit, and those are the biggest lines on the bill.
Screened Porch Cost Starts With the Roof and Floor, Not the Mesh
Every cost guide splits a screened porch into the same lines: roof, floor or foundation, posts, screen, doors, permit and electrical. Read them per square foot and the order is plain. On Angi’s list, asphalt shingle roofing runs $16 to $30 a square foot and a foundation $4 to $14. Fiberglass mesh is 25 to 50 cents.

A 12×16 with the house along one long side has about 40 feet of open wall, and at 8 feet high that’s 320 square feet of screen. A 48-inch by 100-foot roll covers 400 square feet and sells for $74 to $133 at a big-box store, which is 18 to 33 cents a square foot. Against a $9,600 new porch, the mesh is under 2% of the bill.
A door can cost more than the mesh: a basic wood screen door with hardware is under $200. A fan is its own line, about $300 to tie into the house circuit and $300 to $1,500 for a damp-rated ceiling fan.
Heavier meshes only move the screen line; if you have a dog or a no-see-um problem, pet and fine meshes compared will tell you which you need. So before you think about mesh at all, look up. Is there a roof over the floor you’re standing on? That one question sorts the three prices below.
Route One: Screening an Existing 12×16 Porch Yourself
If the roof, floor and posts are sound, this route wins by a mile, because there’s no foundation to buy. Inch Calculator puts materials at $3 to $5 a square foot, so 192 square feet comes to $576 to $960. HomeAdvisor says about $1,000 for a do-it-yourself screen-in. Call it roughly $600 to $1,000.

That buys the mesh roll, framing lumber, battens or a track system, fasteners; a door adds $100 to $300. How to put them together is in the do-it-yourself screen-in.
“Sound” means posts that stand straight and level, a roof that doesn’t leak where it meets the house, and boards that don’t give underfoot. If rain ends up in the floor, you have a floor job before you have a screen job, and route one has turned into route three.
When the bones are good, this is the route I’d steer most people toward, especially anyone whose roofed porch empties at dusk because of the bugs. A modest porch you sit on four nights a week beats a showpiece used twice a summer, and about $1,000 of mesh, lumber and battens gets you the first kind.
Route Two: Hiring Out the Screen-In and Reading What the Quote Itemises
Hand the same job to a crew and the price lands anywhere from about $960 to $4,800, mostly because the guides disagree. Angi’s main cost page says $5 to $20 a square foot, with $2,000 for a 144-square-foot porch and $2,900 for 224. Angi’s own value page says $5 to $7 a foot and $700 to $1,000 for a 12×12. Its sister site carries the same $2,000 to $4,000 band, so that’s one company saying two things, not two sources agreeing. HomeGuide, which is independent, puts a hired screen-in at $2,000 to $5,000, or $10 to $25 a foot for the wall screens.

For a 12×16, Angi’s size table is the best yardstick. 192 square feet sits 60% of the way from 144 to 224, and 60% of the $900 gap between their prices is $540, so about $2,540. Where you live moves it too: Angi’s city ranges run from $1,000 to $2,500 in Cincinnati to $1,800 to $3,500 in Los Angeles, so get local bids.
An itemised quote is easier to argue with than a single number. Here’s a quoting-software maker’s model of a new 12×16 cedar porch. It isn’t a real bid, but it shows how a quote is laid out:
| Line | Amount |
|---|---|
| Framing: posts, beams, rafters | $1,518 |
| Screen panel system, 44 linear ft at $22 | $968 |
| Two screen doors | $520 |
| Asphalt shingles and flashing | $295 |
| Hardware and anchors | $310 |
| Labor, 56 hours at $85 | $4,760 |
Look for the roof in that list. It’s $295 of shingles, with the rafters folded into framing and the work folded into labor. That’s the first thing I notice on an itemised quote: the roof never looks as big on paper as it is overhead. Three questions to ask of any screen-in quote:
- Is the screen its own line, so you can see what the mesh grade costs?
- What are the frames made of? Two quotes with different frames aren’t the same job.
- What’s left out? Permit and electrical were missing from the example above, and a quote with a door can’t be compared with one without.
Route Three: Building a New Screened Porch, Where the Roof and Floor Are the Biggest Lines
No roof means you aren’t screening anything yet. You’re building a small room with mesh for walls. Angi’s table holds at $50 a square foot at every size it lists, $7,200 for 144, $11,200 for 224 and $20,000 for 400, which puts a 12×16 at $9,600. HomeGuide spans $50 to $175 a foot, or $9,600 to $33,600.

The Roof Is One of the Biggest Lines
At Angi’s $16 to $30 a square foot, asphalt shingle roofing over 192 square feet is $3,072 to $5,760, several times the whole do-it-yourself screen-in. Shape moves it a lot. HomeGuide prices a flat roof at $20 to $60 a square foot installed and a gable at $70 to $155. Don’t stack a guide’s roof, floor and foundation lines on top of its whole-porch rate; they overlap, and you’ll price a porch nobody builds.
Build for your climate’s worst month. Where the worst month is a wet one, that makes the roof the line to spend on first. If all you want is shade over a patio, an open frame is a pergola question, covered in the pergola guide. The roof shapes themselves, shed, gable and flat, are compared in the covered outdoor kitchen guide.
Floor, Posts and Foundation
Angi’s foundation line of $4 to $14 a foot is $768 to $2,688 on a 12×16, and concrete pavers on top add $2 to $7 a foot, or $384 to $1,344. Then the permit, $100 to $300 in most guides, though local schedules run from about $100 to over $1,400. Any fan circuit goes to an electrician.
One 12×16 Porch, Three Ways, Side by Side
| Route | What you pay for | 12×16 cost | What must already be sound | My call |
|---|---|---|---|---|
| DIY screen-in | Mesh roll, frame lumber, battens or track, fasteners; a door adds $100–$300 | About $600–$1,000 | Roof, floor and posts | Do this first if the roof and floor are good |
| Hired screen-in | The same materials plus labor | About $960–$4,800; typical $2,000–$4,000; about $2,540 on Angi’s table | Roof, floor and posts, plus a quote that itemises the frame | Worth it if you’d rather pay for tight seams and a well-hung door |
| New build | Roof, floor or foundation, posts, framing, mesh, doors, permit, fan circuit | About $9,600–$33,600 | Nothing; you buy it all | Only when there’s no roof to screen |

Whichever row is yours, set aside 10% to 25% for surprises. On a $9,600 build that’s $960 to $2,400; on a $2,540 screen-in it’s $254 to $635. Start from the roof and floor you already own, and price the screen-in before anything bigger.
Is a Screened Porch Worth It? Count the Seasons You Will Use It
You’ll see percentages quoted for what a screened porch returns when you sell. None of them traces back to a study, and the best-known national resale report, Cost vs Value, has no screened porch in it at all. A better test is what each season on the porch costs you.

Cost guides give screens about 6 to 8 years. Spread $576 to $1,000 of do-it-yourself materials over that and you’re paying $72 to $167 a season. A hired $2,540 screen-in over the same 6 to 8 years is $318 to $423. A new build from $9,600, over a 20- to 30-year porch life, is $320 to $480 a season before you ever rescreen it. Your nights out there are your number; for example, four nights a week for 20 weeks is 80 nights, which makes the do-it-yourself porch 90 cents to $2.09 a night and the new build $4 to $6.
The hired screen-in and the new build land close per season because screens wear out in 6 to 8 years while a porch frame lasts decades. The cheap seasons belong to whoever already has a roof overhead and screens it themselves. Shade is worth more than a heater, and a roof you already own is shade you’ve already paid for.
Keep one figure with its assumption attached: screening the porch you already have yourself, at 80 nights a season, runs about 90 cents to $2 a night. Once the number is settled, the ideas for the finished porch pick up where the money question stops.
FAQ
How much does it cost to re-screen a porch when the old mesh wears out?
Hired rescreening runs about $800 to $5,200, averaging around $2,900, and Angi puts screen life at 6 to 8 years. Doing it yourself is far cheaper: one 48-inch by 100-foot fiberglass roll at $74 to $133 covers about 400 square feet, enough for a 12×16 porch’s open sides.
Does a screened porch count as square footage when you sell your house?
Not as finished living area. Appraisers follow the ANSI Z765-2021 measuring standard, which Fannie Mae requires, and it counts finished, heated, above-grade space. A porch is left out unless it has been converted to living space with permits. An appraiser can still adjust for it as a separate feature, though there’s no standard dollar figure for that.
Do you need a permit to screen in an existing porch?
Usually not for screens alone, going by the cost guides, but your local building department decides, so call before you start. Guides list a permit fee for a new covered porch, and fees vary widely: $150 in McHenry County, Illinois, $100 plus 75 cents a square foot in New Hyde Park, New York, and $1,411 in Tuolumne County, California.


